| MRM-101 motor driven IC card / mgnetic stripe
card read / writer specification
Special Features
Only ONE UNIT to support both Magnetic stripe card and contact IC card.
Open-able Card drive unit, for card cleaning and withdrawal.
The card can be forcibly ejected by twisting a knob. Even the thin card
(t=0.22mm or more), which was inserted by mistake, can be ejected.
By intaking the card from "Card Dispensor(Option)", card vending
is available.
Built in circuit to facilitate external LED
Basic Specification
| Item |
Description |
| Magnetic Card |
Applicable Card |
ISO/IEC7810,7811-1,7811-2(JIS-I)
JIS X 6301(ISO),6302-II(JIS-II),AAMVA,CADMV
Paper Card(t=0.76mm)
|
| Read / Write |
Read only (Maximum 4 tracks can be read simultaneously)
(Note 1) |
| IC Card |
Applicable Card |
ISO/IEC7816-1, 2, 3, 4 JIS X 6303, 6304 ,6306 |
| Read / Writer |
Read & Write (Note1) |
| Interface |
Standard Serial Interface |
Serial Interface RS232C |
| Transmission |
Half Duplex |
| Data Rate |
1,200/2,400/4,800/9,600/19,200/38,400bps(Default Setting:
38,400bps, Adjustalbe by command) |
| Card Drive |
Card insertion: availabe from both front and rear slot
Card suspension at rear conveyance is available
|
| Shutter mechanism |
Full range block-able shutter |
| Device Port for LED |
Max. 4 device ports are available (Open collector output
max.20 mA) |
| Device Port for Alarm |
1 Port is available (Open collector output max. 20 mA) |
| Forcibly Ejection |
Available by twisting knob (available without power
supply) |
| Card Drive Open-mechanism |
Upper cover of card drive is fully open-able |
| Power Supply requirement |
DC24 +-10% (max 2A) |
| Operational Environment |
-10 to 60 degree-C, 20 to 90%RH (No condensation) (Maximum
wet-bulb temp.: 48 degree-C)
|
| Storage Environment |
-20 to 70 degree-C, 20 to 90%RH (No condensation) (Maximum
wet-bulb temp,: 48 degree-C)
|
| Dimensions |
91mm(w)* 148mm(H)*46mm(H) |
| Referred Standard |
EMV2000 level 1 acquisition |
| Conveyance speed |
250mm/sec or more |
| Weight |
Approx. 350g |
Note 1: For Back-side insertion, reading is not available with both magnetic
/ contact IC. The specification will be modified without prior announcement.
|
